Home Page

WIRELESS EARLY WARNING SYSTEM (INDOOR ALERT)

The INDOOR ALERT series of products are designed to give fast and reliable warning of impending dangers or hazards.

The system is very versatile and can be used for weather, chemical, biological, radiological, flood, security, or any other impending hazard or alert in which you need to alert a single, or several zones at once.

Typical applications would be for citys, factories, schools, campuses, etc.

Modules are designed to be hands free and completely automatic. Simply plug the module in and let it go to work for you.

All products have battery backup.

Wireless makes the system easy to impliment. System operates on common VHF radio frequencies so it can be set up to be used with your existing radio system.

All products carry a full 1 year warranty.

Our technical support staff is ready to assist you. We have over 60 years of combined technical experience and will be able to help you impliment your system from start to finish.

We have been serving the amateur and commercial radio industry for over 60 years.

HA-150C

The HA-150C is a compact module that is activated in conjunction with your local sirens to give you an indoor alert. It is designed to complement your outdoor siren system. (IAC-150V system required)

Ruggedly Built

It is ruggedly built with a loud alert tone (108 DB @ 2 feet) so it can be easily heard in noisy conditions (factories or large buildings). It is also great for apartment complexes, nursing homes, dormitories, or home use.

Simple to Use

Module only requires an AC outlet to function. Simply install the 9 volt battery, plug into an unused AC outlet, and let it work for you.

Battery Backup

Unit runs on a 9 volt battery if power is interrupted. Battery "Low" indicator included along with a visual alert LED.

Protect Your Employees, Customers and Home

Unit Price $119.95

 

Download HA-150C.pdf

HA-150CV

The HA-150CV is a compact module that is activated in conjunction with your local sirens to give you and indoor alert. It is designed to complement your outdoor siren system.

Ruggedly Built

It is ruggedly built. When activated it gives a voice alert indicating the hazard. (IAC-150V system required)

Simple to Use

Module only requires an AC outlet to function. Simply install the 9 volt battery, plug into an unused AC outlet and let it work for you.

Battery Backup

Unit runs on a 9 volt battery if power is interrupted. Battery "Low" indicator included along with a visual alert LED.

 

 

 

Download HA-150CV.pdf

PROTECT YOUR EMPLOYEES, CUSTOMERS AND HOME

Unit Price $119.95

Midland

Model 74-109SP

Weather Max Plus

Weather/All-Hazard VHF Radio

In the event of weather or other hazard the 74-109 Special can be activated with your local siren system. (IAC-150V system required)

In the event of severe weather or any other type of hazardous situation, a warning signal is broadcast and the radio's "alert" is activated - sounding a 90 decibel siren, a voice warning or flashing a visual red LED alert. There is also an accessory jack for keying add-on external alert devices such as strobe lights or pillow vibrators (sold separately).

To add to it's versatility, this durable, compact radio fits easily anywhere and plugs into a standard 120v AC outlet. A built-in jack permits powering the unit from any 12v DC vehicle or boat (cable sold separately). And with its 9v battery backup system (battery not included), it even operates during a power outage or outdoors. At home, at work or on the go, this ingenious little device could be a real life saver!

Unit Price $49.95

Download 74-109SP.pdf

IAC-150V

Indoor Alert/Siren Controller

The IAC-150V is a self contained rack mount or desk top controller designed to remotely control a siren and signal indoor alert modules when interfaced to a radio.

It can be controlled by the following three methods:

1) TELEPHONE CONTROL
The IAC-150V can be controlled via a telephone line using a standard touch tone phone. It uses a programmable DTMF code up to 14 digits to activate the siren or indoor alert modules. The IAC-150V can be configured to activate the outdoor siren and indoor modules simultaneously or independently of one another. Both can be disarmed at any time using the telephone control method.

2) ON AIR RADIO CONTROL
The IAC-150V can also be radio controlled using standard DTMF digits. With radio control, the siren and modules are activated simultaneously and will alert for a predetermined amount of time which is programmed into the controller. After activation, you have 10 seconds to disarm the system if necessary.

3) MANUALLY CONTROLLED
The IAC-150V can also be manually controlled by simply placing the selected control line to ground. The controller has these inputs available via the DB-25 connector on rear of controller. This makes it easily interfaceable to chemical, biological, temperature, or other sensors to provide a completely automated alert.

* CONTROL OF EXISTING SIREN
The IAC-150V can also control an existing siren. All four decoders will set the siren of constant while the last decoder can be configured for 8 seconds on 8 seconds off for a fire alert.

* DIGITAL VOICE MESSAGING
The IAC-150V has four 10 second programmable digital voice messages. This gives digital voice messaging for the HA-150C/V indoor alert module and 74-109SP.

Unit Price $499.95

Download IAC-150V.pdf